# Connecting to your Umbrel

Updated February 21, 2026

Once your Umbrel is set up and connected to your router, you can access it from any device on the same network.

## [Open umbrel.local](/content/support/getting-started/connecting-to-your-umbrel#open-umbrellocal/index.html)

On a computer or phone connected to the same network, open a browser and go to [http://umbrel.local](http://umbrel.local/). This works on most devices and networks out of the box.

## [If it doesn't work](/content/support/getting-started/connecting-to-your-umbrel#if-it-doesnt-work/index.html)

Some routers and devices don't support `.local` addresses. If it doesn't load, you can use your Umbrel's IP address instead — for example, `http://192.168.1.100`. Here are a few ways to find it:

- **Check Settings.** If you can already access your Umbrel, your local IP address is shown in **Settings**.
- **Check your router's app.** If you have a modern router like Eero, Google Wifi, or Orbi, open its companion app and look for a device named "umbrel" in the list of connected devices.
- **Use the Fing app.** [Fing](https://www.fing.com/) is a free app that scans your network and shows all connected devices. Look for "umbrel" in the list.
- **Check your router's admin page.** Open `192.168.1.1` or `192.168.0.1` in your browser (check your router's documentation for the exact address), log in, and look for a connected device named "umbrel".

Once you find the IP address, type it into your browser to access your Umbrel.

For more details, see [Network troubleshooting](/content/support/troubleshooting/network-troubleshooting/index.html).

## [Common issues](/content/support/getting-started/connecting-to-your-umbrel#common-issues/index.html)

- **Make sure you're on the same network.** Your computer or phone must be connected to the same router as your Umbrel — not a guest network or a different access point.
- **Make sure your Umbrel is powered on and connected via ethernet.** Check that the ethernet cable is plugged in to both your Umbrel and your router, and that the LED is on.
- **Try a different browser.** Some browsers or extensions can interfere with `.local` address resolution.
- **Restart your router.** If your Umbrel was recently connected, your router may need a moment to assign it an IP address. A restart can help.

## [Accessing your Umbrel remotely](/content/support/getting-started/connecting-to-your-umbrel#accessing-your-umbrel-remotely/index.html)

To access your Umbrel from outside your home network, see [Remote access](/content/support/basics/remote-access/index.html).